HR1062, High Performance, Full Duty, Multimode Digital Repeater

Description

Radio Features
• Size: Standard 1U, 44mm x 483mm x 366mm
• Weight: 5.8Kg including Power Supply.
• UHF 400-470MHz 5-50W, VHF 136-174MHz 5-50W
• 64 Channels, 1 Zone of 64 Channels
• DMR, Analog and optional XPT Trunking
• Networking: IP-Connect, WireLess-Link over DMR, SIP
• 1 x Ethernet RJ-45 Port, 2 Ports on Enhanced HR1062S
• AC and DC Power Inputs with AC/DC auto-switching
• 100% Continuous duty cycle @ 50W
• Supports two simultaneous voice paths in digital mode
• Supports operation in Analog and Digital mode
• Auto detection between analog mode and digital mode
• Multiple CTCSS/CDCSS in analog and mixed channel
• IP Connect (Analog and Digital mode)
• SIP Gateway to support Digital Telephony
• Scrambler (analog), Strong Digital Encryption ARC4
• Enhanced AES256 Encryption capable (license required)
• XPT Multisite Digital Trunking capable (license required)
• IPPBX Telephony & IP Router included in Enhanced HR1062S
• Remote Admin WebCPS included in Enhanced HR1062S
• 3 Years Warranty

COMPACT 1U FORM FACTOR

The 1U height is half that of conventional repeaters, and the HR1062 features a in-built power supply to save valuable rack space.

ANALOG & DIGITAL AUTO SWITCH

Mixed channel mode detects the receiving signal and automatically switches between analog and digital mode to provide a simple migration path.

WIDE COVERAGE

Enhanced Rx sensitivity extends communication range, and an Ethernet port provides access to IP networks to enable remote site connectivity.

HIGHER SECURITY

The HR1062 supports Digital End-to-End and Overthe-Air Encryption. This optional software-based encryption uses the secure and reliable ARC4 and AES encryption algorithms.

AC/DC AUTO SWITCH

The HR1062 supports AC/DC auto switching for locations with different power sources, power redundancy, and eliminates the cost and space required for power adapters.

RELIABLE OPERATION

Variable speed fan provides optimal cooling with front to back internal airow, combined with high quality components to ensure 100% duty cycle operation for mission critical applications.

DMR – 2 TDMA 2 TIME SLOTS

TDMA digital technology provides 2 simultaneous voice channels that improves efficiency and doubles capacity without an extra frequency.

Technical Specifications

General

Frequency Range	UHF 400-470MHz , VHF 136-174MHz
Channel Capacity	64 Channels
Channel Spacing	12.5kHz / 20kHz / 25kHz
Operational Voltage	DC: 13.6V ±15% AC: 100-120V
Current Consumption	DC: Standby ≤0.9A, Transmitting ≤12A AC: Standby ≤0.35A, Transmitting ≤1.2A
Weight	17lb 10oz (8.0 kg)
Dimensions (HxWxD)	Standard 1U: 13/4” x 19” x 143/4” (44 x 483 x 366mm)
Frequency Stability	± 0.5ppm
Antenna Impedance	50Ω
Duty Cycle	100%
Networking	Conventional Mode, MPT and XPT Trunking, Tier III Trunking Upgrade Capability, *Digital Trunking Lite (*coming soon)

Receiver

Digital Sensitivity	0.2μV (BER5 5%) 0.18μV (Typical)/BER 5%
Analog Sensitivity	0.16μV (Typical) (12dB SINAD) 0.18μV (12dB SINAD)
Adjacent Selectivity	TIA-603: 65dB@12.5kHz, 75dB@20/25kHz ETSI: 60dB@12.5kHz, 70dB@20/25kHz
Spurious Response Rejection	TIA-603: 80dB@12.5/20/25kHz ETSI: 80dB@12.5/20/25kHz
Intermodulation	TIA-603: 75dB@12.5/20/25kHz ETSI: 70dB@12.5/20/25kHz
Blocking	90dB
Hum and Noise	40dB@12.5kHz, 43dB@20kHz, 45dB@25kHz
Rated Audio Distortion	≤3%
Audio Response	+1 to -3dB
Conducted Spurious Emission	≤1GHz: 1GHz: ≤-47dBm

Transmitter

RF Power Output	5-50W adjustable
FM Modulation	11K0F3E @ 12.5kHz 14K0F3E @ 20kKh 16K0F3E @ 25kHz
4FSK Digital Modulation	12.5kHz Data Only: 7K60FXD 12.5kHz Data and Voice: 7K60FXW
Conducted/Radiated Emission	Operating: ≤1GHz: -36dBm >1GHz: -30dBm Standby: ≤1GHz: -57dBm >1GHz: -47dBm
Modulation Limiting	±2.5kHz @ 12.5kHz ±4.0kHz @ 20kHz ±5.0kHz @ 25kHz
FM Hum and Noise	40dB @ 12.5kHz, 43dB @ 20kHz, 45dB @ 20/25kHz
Adjacent Channel Power	60dB @ 12.5kHz, 70dB @ 20/25kHz
Audio Response	+1 to -3dB
Audio Distortion	≤3%
Digital Vocoder Type	AMBE+2TM
Digital Protocol	ETSI-TS 102 361-1,-2,-3

Environmental

Operating Temperature	-22°F to +140°F (-30°C to +60°C)
Storage Temperature	-40°F to +185°F (-40°C to +85°C)

Ordering Information

HR1062-U1	DMR Repeater UHF 400-470MHz, 5-50W, DMR Tier II & Analog Conventional Mode
HR1062-V1	DMR Repeater VHF 136-174MHz, 5-50W DMr Tier ll & Analog Conventional Mode