HR652 Compact and Fully Featured Portable Digital Repeater

Description

RADIO FEATURES

• Size: 201mm x 211mm x 80.6mm, 25W model
• Size: 201mm x 211mm x 65.8mm, 10W model
• Weight: 2.0Kg 25W model, 1.9Kg 10W model no Battery
• UHF 400-470MHz 1-10W or 1-25W, VHF 136-174MHz 1-10W or 1-25W
• 64 Channels, 1 Zone of 64 Channels
• DMR, Analog and optional XPT Trunking & SFR Modes
• Networking: IP-Connect, SIP Telephony
• Optional 12.5Ah Lithium Ion Battery
• Battery Life up to 9H at 10W 50% duty cycle.
• DC and Battery Operation with auto-switching
• IP67 and MIL-STD-810 C/D/E/F/G, 10W model
• IP54 and MIL-STD-810 C/D/E/F/G, 25W model
• Supports two simultaneous voice paths in digital mode
• Supports operation in Analog and Digital mode
• Auto detection between analog and digital mode
• Multiple CTCSS/CDCSS in analog and mixed channel
• IP Connect in Analog and Digital modes
• SIP Gateway to support Digital Telephony
• GPS Positioning (GPS/BDS) for mobile applications
• Scrambler (analog), Strong Digital Encryption ARC4
• Enhanced AES256 Encryption capable (license required)
• SFR Single Frequency Repeater Capable
• 3 Years Warranty

Ultra-Compact Form Factor Farther Coverage

Weighing only 4 pounds, 6 ounces and measuring less than 7” tall (without the optional battery) the HR652 delivers unprecedented performance in a compact form factor. It can be deployed in portable applications or be installed on any at surface in areas with limited wall space.

ANALOG & DIGITAL AUTO SWITCH

The HR652 can operate in analog mode, DMR mode, or dynamic mixed digital/analog mode, which automatically switches between analog and digital calls, and provides an ideal solution for smooth analog to digital migration with minimal investment.

RELIABLE OPERATION

The HR652 is built to perform in harsh environments with MIL-STD-810H compliance for ruggedness and impact resistance, and IP54 rated for dust and water intrusion. The HR652 can be configured for 25W high power transmission or variable Wattage low power transmission for localized coverage and preventing interference

HIGHER SECURITY

The HR652 supports Digital End-to-End and Overthe-Air Encryption with optional ARC4 and AES advanced encryption algorithms.

BUILT-IN BLUETOOTH

HM652 models that feature Bluetooth support audio handset accessories to improve safety and productivity during in-vehicle communications

Farther Coverage

The HR652 features industry-leading RX sensitivity and 25 Watts output power, increasing the effective communication range for DMR radios throughout a campus, or on each oor of a high-rise building. It covers more area than other compact repeaters, delivering cost-effective coverage for the entire facility. The HR652 also functions as a Single Frequency Repeater that uses both DMR timeslots to receive and forward calls over a single frequency in Direct Mode.

Optional Battery Power

The HR652 features an optional battery for portable applications and for battery backup in xed indoor installations in the event of a power outage. The 12.5Ah large-capacity battery can provide up to 4 hours at 25W. Fast charging technology enables the battery to be fully charged in just 3.5 hours with the optional AC/DC power adapter 100W fast charger.

Portable

The HR652 can be equipped with the optional battery, dedicated antenna, GPS, and a light backpack for mobile search and rescue operations. It can also be deployed in vehicles for mobile coverage and powered by the vehicle battery. The HR652 can be turned on and used immediately upon arriving at the site. The ultra-light design can also be used with drones to achieve a wider range of signal coverage

HANDHELD CONTROL HEAD

The Handheld Control Head provides easy operation with a convenient location to control power, switch channels or contacts, adjust volume, or view messages.

Technical Specifications

General

Frequency Range	UHF 400-470MHz
Channel Capacity	1,024 Channels
Channel Spacing	12.5kHz / 20kHz / 25kHz
Operational Voltage	DC Power Input: 14.4V 15% ± Battery Voltage: 12-16.8VDC
Current Drain	DC: Standby ≤0.35A, Transmitting 10W ≤3A, 25W ≤6A AC: Standby ≤0.35A, Transmitting ≤1.2A
Weight	4lb, 6oz (2.0 kg) without battery
Dimensions (HxWxD)	7 15/16” x 8 5/16” x 3 3/16” (201x211x80mm)
Frequency Stability	± 0.5ppm
Antenna Impedance	50Ω
Battery	14.4V/125Ah/1,800W
Battery Life (50-50 Duty Cycle)	High Power setting 25W: 4 hours Low Power setting 10W: 9 hours
Duty Cycle	100%

Receiver

Digital Sensitivity	0.2μV (BER5 5%) 0.18μV (Typical)/BER 5%
Analog Sensitivity	0.16μV (Typical) (12dB SINAD) 0.18μV (12dB SINAD)
Adjacent Selectivity	TIA-603: 65dB@12.5kHz, 75dB@20/25kHz ETSI: 60dB@12.5kHz, 70dB@20/25kHz
Spurious Response Rejection	TIA-603: 80dB@12.5/20/25kHz ETSI: 80dB@12.5/20/25kHz
Intermodulation	TIA-603: 75dB@12.5/20/25kHz ETSI: 70dB@12.5/20/25kHzd
Blocking	90dB
Hum and Noise	40dB@12.5kHz, 43dB@20kHz, 45dB@25kHz
Rated Audio Power Output	≤3%
Rated Audio Distortion	+1 to -3dB
Audio Response	+1 to -3dB
Conducted Spurious Emission	Operating ≤1GHz: 1GHz: ≤-47dBm

Transmitter

RF Power Output	High Power setting 5-25W (Continuous Adjustable) Low Power setting 1-5W (Continuous Adjustable)
FM Modulation	11K0F3E @ 12.5kHz 14K0F3E @ 20kKh 16K0F3E @ 25kHz
4FSK Digital Modulation	12.5kHz Data Only: 7K60FXD 12.5kHz Data and Voice: 7K60FXW
Conducted/Radiated Emission	Operating: ≤1GHz: -36dBm, >1GHz: -30dBm Standby: ≤1GHz: -57dBm, >1GHz: -47dBm
Modulation Limiting	±2.5kHz @ 12.5kHz ±4.0kHz @ 20kHz ±5.0kHz @ 25kHz
FM Hum and Noise	40dB @ 12.5kHz, 43dB @ 20kHz, 45dB @ 20/25kHz
Adjacent Channel Power	60dB @ 12.5kHz, 70dB @ 20/25kHz
Audio Response	+1 to -3dB
Audio Distortion	≤3%
Digital Vocoder Type	AMBE+2TM
Digital Protocol	ETSI-TS 102 361-1,-2,-3

Environmental

Operating Temperature	-22°F to +140°F (-30°C to +60°C)
Storage Temperature	-40°F to +185°F (-40°C to +85°C)
Dust and Water Intrusion	IP54 Standard
Shock, Vibration, and Humidity	MIL-STD 810H

Ordering Information

HR652-U1

Compact DMR Repeater UHF 400-470MHz, 5-25W, DMR Tier II & Analog Conventional Mode